View GBLA005_4399642.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

SINGLE-PHASE GLASS PASSIVATED BRIDGE RECTIFIER
GBLA005 THRU GBLA10
FEATURES
* * * * * *
VOLTAGE RANGE CURRENT
50 to 1000 Volts 4.0 Amperes
20.7 - 20.9 20.7x45
O
Plastic package has Underwriters Laboratory Flammability Glassification 94V-0 Glass passivated chip junctions High case dielectric strength High surge current capability Ideal for printed circuit boards High temperature soldering guaranteed 260/10 seconds, 0.375"(9.5mm) lead length,5 lbs. (2.3kg) tension
1.9 - 2.5 2.03 - 2.41
+
~
~
~
0.9 - 1.1
4.8 - 5.3
0.80 - 1.08
0.46 - 0.56
MECHANICAL DATA
* * * *
Case: molded plastic body Terminal: Plated leads solderable per MIL-STD-750 Method 2026 Mounting position: Any Weight: 0.071 ounce,2.0 gram
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
* * *
Ratings at 25 ambient temperature unless otherwise specified Single Phase, half wave, 60Hz, resistive or inductive load For capacitive load derate current by 20% GBLA GBLA SYMBOLS 01 005 Maximum Reverse Peak Repetitive Voltage VRRM 50 100 Maximum RMS Voltage VRMS 35 70 Maximum DC Blocking Voltage VDC 50 100
Maximum Average Forward Rectified Output Current, At T C=50 TA=40
GBLA
GBLA
GBLA
GBLA
3.25 - 3.56
GBLA
17 - 18.2
10.4 - 10.7
1.5 - 2.03
02 200 140 200
I(AV) IFSM I2 t VF IR CJ RJA RJL TJ ,TSTG 95.0
04 400 280 400 4.0(Note 1) 3.0(Note 2) 120 60 1.0 5.0 500
06 600 420 600
08 800 560 800
10 1000 700 1000
UNIT Volts Volts Volts Amps Amps A2s Volts
A
Peak Forward Surge Current 8.3ms single half sine wave superimposed on rated load (JEDEC Method) Rating for Fusing (t8.3ms) Maximum Instantaneous Forward Voltage drop Per Bridge element 4.0A TA=25 Maximum Reverse Current at rated DC blocking voltage per element TA=125 Typical Junction Capacitance per leg (Note 3) Typical Thermal Resistance (Note 1) Typical Thermal Resistance (Note 2) Operating and Storage Temperature Range
40.0 22 10 (-55 to +150)
pF /W /W
Notes: 1. Unit mounted on 3.0x3.0x0.11" thick (7.5x7.5x0.3cm) AL. plate
2. Unit mounted on P.C.B. at 0.375" (9.5mm) lead lengh and 0.5x0.5"(12x12mm) copper pads 3. Measured at 1.0MHz and applied reverse voltage of 4.0 V
E-mail: sales@cnmic.com
Web Site: www.cnmic.com
SINGLE-PHASE GLASS PASSIVATED BRIDGE RECTIFIER
GBLA005 THRU GBLA10
VOLTAGE RANGE CURRENT
50 to 1000Volts 4.0 Ampere
RATINGS AND CHARACTERISTIC CURVES GBLA005 THRU GBLA10
FIG. 1- DERATING CURVE OUTPUT RECTIFIED CURRENT AVERAGE FORWARD OUTPUT,CURRENT (A)
5.0
FIG. 2- MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT PER LEG
150
60 Hz Resistive or Inductive Load Heat- SinkMounting 3.0x3.0x0.11"Thick (7.5x7.5x0.3cm) Aluminum Plate
4.0
PEAK FORWARD SURGE, CURRENT,(A)
TJ = T J max. Single Sine-Wave (JEDEC Method)
100
3.0
2.0
50
1.0
P.C.B. Mounting 0.47x0.47"(12x12mm) Copper pads with 0.375" (9.5mm) lead length
1.0 CYCLE
0 100 150 1 10 100
0 0 50
AMBIENT TEMPERATURE,
NUMBER OF CYCLES AT 60 Hz FIG. 4- TYPICAL REVERSE LEAKAGE CHARACTERISTICS PER LEG
500
FIG. 3- TYPICAL FORWORD VOLTAGE CHARACTERISTICS PER LGE
100
INSTANTANEOUS FORWARD CURRENT, (A)
10
INSTANTANEOUS REVERSE CURRENT, (A)
100
10
TA =125 50-400V 600-1000V
1
1
0.1
TJ=25 s Pulse width=300 1% Duty Cycle
0.01 0.4 0.6 0.8 1.0 1.2 1.4 1.6
0.1
TA =25
0.01 0 20 40 60 80 100
INSTANTANEOUS FORWARD VOLTAGE,(V)
PERCENT OF RATED PEAK REVERSE VOLTAGE,(V) FIG. 6- TYPICAL TRANSIENT THERMAL IMPEDANCE PER LEG
100
FIG. 5- TYPICAL JUNCTION CAPACITANCE PER LEG
1000
TRANSIENT THERMAL IMPEDANCE (/W)
JUNCTION CAPACITANCE, (pF)
T j =25 f=1.0MHz Vsig=50mVp-p
10
100
1
10 0.1
50-400V 600-1000V
1 10 100
0.1 0.01 0.1 1 10 100
REVRESE VOLTAGE,(V)
T, HEATING TIME (SEC.)
E-mail: sales@cnmic.com
Web Site: www.cnmic.com

▲Up To Search▲

Price & Availability of GBLA005

	To Download GBLA005 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .